| Test Method |
: Dispersion light nephelometric analysis |
| Test Principle |
: The highest point on first order differentiation, Percentage analysis 'Zero Point Correction: Auto track the zero point, eliminate the interference of sample and reagent
|
| Wavelength |
: 470nm |
| Light Source |
: Cold lamp with high brightness and long lifetime |
| Detector |
: Unique dispersion light detector with high sensitivity and repeatability, immunized the effect on result of jaundice. hemolysis. chyle and turbidity on plasma |
| Test Channel |
: Each channel is independent, one or more, same or different items can be tested simultaneously |
| Incubator |
: Provide reagent and sample with stable incubator, |
| Incubator Temperature |
:37 ± 0.2°C |
| Measure Pitette |
: Auto pitette the measurement through configured pipette |
| Item Modify |
: Easy to add or edit items, easy to set the items parameters |
| Calibration |
: Single-point calibration;multipoint calibration;auto store and match with calibration curve |
| Quality Control |
: Auto draw the quality figure/td>
|
| Reagent |
: Open reagent system/td>
|
| Reagent Volume |
: ≤ 40µ L/td>
|
| Sample Volume |
: ≤ 40µ L/td>
|
| Memory |
: Save more than 10000 sample results, and auto recovering the results when power is off during working condition/td>
|
| Test Channel |
: Each channel is independent, one or more, same or different items can be tested simultaneously/td>
|
| Repeatability |
: CV < 5%/td>
|
| Calculative Item |
: S. %. PTIR. INR, FIB can be got through PT, This leads to lower the cost of reagent/td>
|
| Printer |
: Inner thermal printer, can be connected to external printer/td>
|
| Interface |
: RS-232 serial port, can be connected to external printer and computer/td>
|
| Working Environment |
: Temperature:10°C - 30°C ;Humidity: < 70%RH/td>
|
| Voltage |
: 85-264V, Auto adaption according to the input voltage |
| Power |
: < 80W |
| Quality System |
: Recognized by CE, TUV and CMD/td>
|
